Short answer: A clogged drain is typically caused by a buildup of hair, soap, grease, or debris inside the trap or the line just past it, and is usually cleared with a drain snake or auger.
Most clogged drains build up gradually rather than happening overnight. A little hair here, some soap residue there, and eventually a drain that used to empty in seconds takes a full minute — or stops moving at all.
The location of the clog matters for how it's cleared. A clog close to the drain opening might respond to a simple tool, while one further down the line typically needs a proper auger to reach and break up.
Signs You May Need This Service
- Water draining slower than usual, or not at all
- Gurgling sounds from a drain or nearby fixture
- Water backing up into a tub or sink when another fixture runs
- A recurring clog in the same drain every few weeks
- A sewage-like smell coming from a drain
What the Service Typically Involves
- Identifying whether the clog is local to one fixture or further down the line
- Clearing the blockage with a drain snake, auger, or hydro-jetting equipment
- Checking for the underlying cause — grease buildup, roots, or a collapsed section
- Recommending a maintenance schedule if the clog is likely to return