Short answer: Toilet repair typically involves fixing or replacing the internal tank components — the flapper, fill valve, or flush mechanism — or addressing a failed wax ring if water is leaking at the base.
Most toilet problems trace back to a small number of parts inside the tank. A flapper that doesn't seal, a fill valve that runs too long, or a worn flush mechanism can all cause a toilet to run constantly, flush weakly, or waste water without an obvious sign anything's wrong.
Water at the base of the toilet is a different issue, usually pointing to a worn wax ring rather than anything inside the tank.
Signs You May Need This Service
- A toilet that runs continuously after flushing
- Weak or incomplete flushes
- Water rocking or wobbling at the base
- Water on the floor around the base after flushing
- Frequent clogs in one toilet specifically
What the Service Typically Involves
- Checking the flapper, fill valve, and flush mechanism inside the tank
- Inspecting the wax ring and base seal for leaks
- Testing the shutoff valve and supply line
- Replacing internal components or the fixture itself depending on age and wear